Showing 13–24 of 75 results

BIDEN CLEARANCE! Buffer Tube AR 15 Stock MIL-Spec AR-15 AIRCRAFT ALUMINUM

$16.16
Add to cart
BIDEN CLEARANCE Buffer Tube AR 15 Stock Milspec AR-15 AIRCRAFT ALUMINUM I Have 60 of these I need to dump. Fits Milspec Stocks Glad you found us!! (Please don't use Paypal. Use Credit card on this item)

Chest Rig Plate Carrier MULTICAM CORDURA JPC Ceramic BULLETPROOF Plates VEST

$571.08
Add to cart

MULTICAM (Certified Cordura Material) Jump Plate Carrier w/ Front MOLLE Panel Tactical Body Armor Vest + Level IV Ceramic Rifle plates

 

Features: * 500D nylon material, waterproof and durable. * Lightweight and minimal armor vest designed for maximum mobility, weight savings and packability. * Offers a variety of configuration options to suit an operator's needs in terms of protection, modularity, and comfort. * Easy 2-step emergency doffing capability. * Included AVS / JPC detachable front MOLLE flap. * Low-profile cummerbund attachment that provides maximum adjustability and allows for chest expansion as needed. * Hidden vertical webbing loops on front carrier supports detachable chest rigs. * Webbing loops on the back of the shoulder straps to support back panels. * Zippers along the sides of the back carrier for zip-on panels. * Fit Armour Plate Size: M Size: 9.5" x 12.5"  (Plates included). * Color : MULTICAM

Package: * Kryd Tactical included MOLLE flap, vest, Plates *2

From the National Institute of Justice (NIJ) website:

5.56mm ammunition designed for military use, with a steel or partial steel core, needs a ceramic or metallic component to the hard armor plate to stop it. Some Level III have a ceramic/metallic face, but not all. If you have identified the M855 or other similarly designed steel core ammunition as a potential threat, a Level IV plate is the best choice for protection.

NIJ LEVEL IV 10X12 SAPI CUT SINGLE CURVE CERAMIC ARMOR PLATE FEATURES:

SAPI Cut Single Curve.

NIJ 0101.06 Level IV.

Protection from 5.56mm green tip SS109.

Waterproof Polyurea Coating for lasting Ballistic Integrity.

Thickness 1.1"

Weight 6.3 lbs. (Please see the RTS Level IV VIDEO reviews on Youtube (MrGunsngear) to see how incredible these plates run and what they stop),

Includes skeleton cummerbund. Ships out of San Diego.  I have 2 in stock.

Legal Notice:

Bidding or Purchasing on this Vest Indicates your AGREEMENT to the following:

-YOU AGREE to HOLD SELLER HARMLESS from Users INJURY or DEATH, and understand ALL Body Armor is not BULLET PROOF—IT IS ONLY BULLET RESISTANT;

- YOU ARE 18 years of age ;

- YOU ARE NOT A FELON;

**United States law restricts possession of body armor for convicted felons. Many U.S. states also have penalties for possession or use of body armor by felons. SladeStreet is also unable to ship any Body Armor, Plates, Shields, etc. to the state of Connecticut or outside of the United States. By purchasing body armor from , you are certifying that you have not been convicted of any crime that would restrict you from being able to purchase or possess body armor under any Federal or State laws. Furthermore, you are acknowledging that you do not intend to use the body armor for any criminal purpose and that you are over the age of 18 years old.

We reserve the right to refuse to sell body armor to any person.** Due to the nature of our product, all sales are final. No returns are accepted after the order has been placed. Please contact us prior to placing your order to address any concerns or questions.

It is important to remember that nothing is "bulletproof" and that there are many variables at play which allow any type of armor to stop a given object. There will always be danger in these types of situations. We will only sell armor to law-abiding adults who have no felony convictions, and are not involved with criminal organizations. Residents of Connecticut are prohibited from buying Body Armor. We will only ship to states where Body Armor is allowed, please know your local and federal laws prior to purchasing. By purchasing, you agree to this and all terms listed on this page, and Body Armor Megastore By purchasing you assume all risks of use or misuse, and agree not to hold us liable in any way. In addition, YOU are responsible to ensure that your ballistic panels are properly inserted and installed. Slade Street Tactical and any of its affiliates assume NO liability.

We neither assume, nor authorize any person to assume for us any liability in connection with the sale or use of the goods sold, and there are no oral agreements or warranties collateral to or affecting this agreement. We hereby give notice that any statement made by us in the sale of the goods, shall not create any warranty that the goods shall be fit for any particular purpose. Statements, images or descriptions are informational only, and not made or given as a warranty of the goods in any way. We specifically disavow any other representation, warranty, or liability related to the condition or use of the goods.

We do not cover any consequential damages, and our liability is limited to repairing or replacing defective goods. This product is sold "AS IS" and "WITH ALL FAULTS". The entire risk as to the quality and performance of the product is with the buyer. We are not an insurer, and bear no liability for any use, misuse, or failure to perform. All warranties including the implied warranties of fitness and merchantability. Incidental and/or consequential damages are excluded. Purchaser covenants and agrees that the purchaser or his/her heirs, agents, assigns shall NEVER bring any action in any court of law from any dispute arising from the Purchase and Sale of product(s) sold by Slade Street Tactical or any of its affiliates. If any part of these terms is held to be invalid by a court of competent jurisdiction, such shall not affect the validity of any other part of these terms.  Headings are for convenience only, and do not limit or affect these Terms. These terms may be updated without prior notice.

In accordance with Marketplace Fairness Act & Remote Transactions Parity Act ALL Customers are liable for all Federal, State and Local Taxes due.  We will collect and handle sales tax for customers from our home state of PA.

To California Residents

  • "The State of California requires that we provide you with the following warning: This product contains Di(2-ethylhexyl)phthalate (DEHP) a chemical known to the State of California to cause cancer and or reproductive harm. For further information go to website  65Warning.ca.gov"

Residents of Connecticut are prohibited from purchasing Body Armor.

No International Shipping

Chest Rig Plate Carrier RANGER Green NIJ Ceramic BULLETPROOF Plates VEST

$560.30
Add to cart

Ranger Green Jump Plate Carrier w/ Front MOLLE Panel Tactical Body Armor Vest Ranger Green + Level IV Ceramic Rifle plates

 

Features: * 500D nylon material, waterproof and durable. * Lightweight and minimal armor vest designed for maximum mobility, weight savings and packability. * Offers a variety of configuration options to suit an operator's needs in terms of protection, modularity, and comfort. * Easy 2-step emergency doffing capability. * Included AVS / JPC detachable front MOLLE flap. * Low-profile cummerbund attachment that provides maximum adjustability and allows for chest expansion as needed. * Hidden vertical webbing loops on front carrier supports detachable chest rigs. * Webbing loops on the back of the shoulder straps to support back panels. * Zippers along the sides of the back carrier for zip-on panels. * Fit Armour Plate Size: M Size: 9.5" x 12.5"  (Plates included). * Color : Ranger Green

Package: * Kryd Tactical included MOLLE flap, vest, Plates *2

From the National Institute of Justice (NIJ) website:

5.56mm ammunition designed for military use, with a steel or partial steel core, needs a ceramic or metallic component to the hard armor plate to stop it. Some Level III have a ceramic/metallic face, but not all. If you have identified the M855 or other similarly designed steel core ammunition as a potential threat, a Level IV plate is the best choice for protection.

NIJ LEVEL IV 10X12 SAPI CUT SINGLE CURVE CERAMIC ARMOR PLATE FEATURES:

SAPI Cut Single Curve.

NIJ 0101.06 Level IV.

Protection from 5.56mm green tip SS109.

Waterproof Polyurea Coating for lasting Ballistic Integrity.

Thickness 1.1"

Weight 6.3 lbs. (Please see the RTS Level IV VIDEO reviews on Youtube (MrGunsngear) to see how incredible these plates run and what they stop),

Includes skeleton cummerbund. Ships out of San Diego.  I have 2 in stock.

Legal Notice:

Bidding or Purchasing on this Vest Indicates your AGREEMENT to the following:

-YOU AGREE to HOLD SELLER HARMLESS from Users INJURY or DEATH, and understand ALL Body Armor is not BULLET PROOF—IT IS ONLY BULLET RESISTANT;

- YOU ARE 18 years of age ;

- YOU ARE NOT A FELON;

**United States law restricts possession of body armor for convicted felons. Many U.S. states also have penalties for possession or use of body armor by felons. SladeStreet is also unable to ship any Body Armor, Plates, Shields, etc. to the state of Connecticut or outside of the United States. By purchasing body armor from , you are certifying that you have not been convicted of any crime that would restrict you from being able to purchase or possess body armor under any Federal or State laws. Furthermore, you are acknowledging that you do not intend to use the body armor for any criminal purpose and that you are over the age of 18 years old.

We reserve the right to refuse to sell body armor to any person.** Due to the nature of our product, all sales are final. No returns are accepted after the order has been placed. Please contact us prior to placing your order to address any concerns or questions.

It is important to remember that nothing is "bulletproof" and that there are many variables at play which allow any type of armor to stop a given object. There will always be danger in these types of situations. We will only sell armor to law-abiding adults who have no felony convictions, and are not involved with criminal organizations. Residents of Connecticut are prohibited from buying Body Armor. We will only ship to states where Body Armor is allowed, please know your local and federal laws prior to purchasing. By purchasing, you agree to this and all terms listed on this page, and Body Armor Megastore By purchasing you assume all risks of use or misuse, and agree not to hold us liable in any way. In addition, YOU are responsible to ensure that your ballistic panels are properly inserted and installed. Slade Street Tactical and any of its affiliates assume NO liability.

We neither assume, nor authorize any person to assume for us any liability in connection with the sale or use of the goods sold, and there are no oral agreements or warranties collateral to or affecting this agreement. We hereby give notice that any statement made by us in the sale of the goods, shall not create any warranty that the goods shall be fit for any particular purpose. Statements, images or descriptions are informational only, and not made or given as a warranty of the goods in any way. We specifically disavow any other representation, warranty, or liability related to the condition or use of the goods.

We do not cover any consequential damages, and our liability is limited to repairing or replacing defective goods. This product is sold "AS IS" and "WITH ALL FAULTS". The entire risk as to the quality and performance of the product is with the buyer. We are not an insurer, and bear no liability for any use, misuse, or failure to perform. All warranties including the implied warranties of fitness and merchantability. Incidental and/or consequential damages are excluded. Purchaser covenants and agrees that the purchaser or his/her heirs, agents, assigns shall NEVER bring any action in any court of law from any dispute arising from the Purchase and Sale of product(s) sold by Slade Street Tactical or any of its affiliates. If any part of these terms is held to be invalid by a court of competent jurisdiction, such shall not affect the validity of any other part of these terms.  Headings are for convenience only, and do not limit or affect these Terms. These terms may be updated without prior notice.

In accordance with Marketplace Fairness Act & Remote Transactions Parity Act ALL Customers are liable for all Federal, State and Local Taxes due.  We will collect and handle sales tax for customers from our home state of PA.

To California Residents

  • "The State of California requires that we provide you with the following warning: This product contains Di(2-ethylhexyl)phthalate (DEHP) a chemical known to the State of California to cause cancer and or reproductive harm. For further information go to website  65Warning.ca.gov"

Residents of Connecticut are prohibited from purchasing Body Armor.

No International Shipping

Dickinson XX3B VAPOR EYE Heat Shield Tactical Shotgun 12 Gauge Barrel

$28.86
Add to cart
Vapor-Eye Heat Shield to fit Pardner Pump and Remington 870 12 Guage Smooth Barrels -FINALLY BACK IN STOCK AFTER 4 MONTHS! TOP SELLING PRODUCT. -Made of virtually indestructible Plasticote Zytel Fiberglass -Will not scratch barrel like metal heat shields will -Overall Length is 13.80" Inches. -Be sure front bracket is fully (Finger Strength) tightened down to ensure flush fit. -Fits ALL Smooth barrel lengths, including 18 inch barrels -Will not add noticeable weight to your gun. -Will not rust. -Will not melt. -When it comes to heat shields, plastic fiberglass is BETTER! -Plasticote Fiberglass conducts heat 10X less than metal heat shields. -Because of the design of the Remington 870 NO removal of barrel is necessary for install (which is awesome). -Simple 2-minute installation with included hardware (see photo for positioning behind retainer lug). -Perfect for active handling and tactical/military applications. -Will not fit short "Breacher" model shotguns or 590A1 Or 590 Heavy Barrel model . -Also fits a Maverick 88 and Mossberg 500 great! -We warranty these shields for life: (break it, scratch it, lose a screw, WE REPLACE IT. FOREVER) Listing and template services provided by inkFrog inkFrog

ETA Etero VAPOR EYE Heat Shield Tactical Shotgun 12 Gauge Barrel SHOTGUN

$23.71
Add to cart
Vapor-Eye Heat Shield to fit 12 Guage Smooth Barrels. -FINALLY BACK IN STOCK AFTER 4 MONTHS! TOP SELLING PRODUCT. -Made of virtually indestructible Plasticote Zytel Fiberglass -Will not scratch barrel like metal heat shields will -Overall Length is 13.80" Inches. (May need a little length sanded-off the shield to fit some guns. Do a measurement from lug-to-reciever.) -Be sure front bracket is fully tightened down to ensure flush fit. -Fits ALL Smooth barrel lengths, including 18 inch barrels -Will not add noticeable weight to your gun. -Will not rust. -Will not melt. -When it comes to heat shields, plastic fiberglass is BETTER! -Plasticote Fiberglass conducts heat 10X less than metal heat shields. -Simple 2-minute installation with included hardware (see photo for positioning behind retainer). -Perfect for active handling and tactical/military applications. -Will not fit short "Breacher" model shotguns or 590A1 Or 590 Heavy Barrel model . -Also fits a Mossberg 500 great! Listing and template services provided by inkFrog inkFrog

Fab Defense Remington 870 Tactical Rail Forend + MAGPUL XTM HAND STOP

$75.00
The PR-870 with it’s three Picatinny compatible rails, enhances your weapon’s mounting versatility. Advantages: -Made in Israel. -Facilitates Three Picatinny Rails. -Mount PicatinnyCompatable Accessories on your Remington Shotgun. -State-of-the-Art Ergonomic Design. -Durable, Hardwearing & Lightweight Construction. -Quick & Easy Installation. -No Gunsmith Required. -Improves Thermal Insulation. -Constructed From Reinforced Polymer Composite. -Replaces factory forend with a more robust construction. . -Excellent for Wet-handed/Dirty conditions. -Mount a vertical-grip or tactical light in seconds. -The forend is constructed of virtually indestructible and fully waterproof / heatproof Milled Aluminum. -Choate style 7 1/2″ in overall length (To fit 6 1/4″ Tube length)

Fits BLUELINE 12 Heat Shield Shotgun 12 Gauge Tactical USA Made!

$30.17
Add to cart
Heat Shield for BLUELINE Pump 12 Gauage Smooth-Barrels. "Originally designed for the Mossberg 500 and Remington 870; we have found that these Heat Shields fit the BLUELINE Pumps GREAT (may take slight mods or sanding).  Shields are 13.75 in length." -FINALLY BACK IN STOCK AFTER 4 MONTHS! TOP SELLING PRODUCT. -Made of virtually indestructable Plasticote Zytel Fiberglass -Will not scratch barrel like metal heat shields will. -Fits ALL Smooth barrel lengths, including 18 inch barrels -Will not add noticeable weight to your gun. -Will not rust. -Will not melt. -When it comes to heat shields, plastic fiberglass is BETTER! -Plasticote Fiberglass conducts heat 10X less than metal heat shields. -Simple 2-minute installation with included hardware (see photo for positioning behind retainer). -Perfect for active handling and tactical/military applications. -Will not fit short "Breacher" model shotguns or 590A1 Heavy Barrel model . -Also fits a Maverick 88 great! -This model has a rear retaining ring for the shield to specifically fit Mossberg shotguns.  Do NOT buy from other sellers that sell the shield WITHOUT the back retaining ring! These other shields are made for Remington! -Happy bidding and Email for any questions. I take pride in my ultra-fast shipping and positive feedback. Product usually leaves our office within hours of payment received. -As always, the lowest price on ebay. Feel confident purchasing from an experienced ebaY Pro! -Chris   (Picture is for display and installation purposes ONLY. Product abides by all ebay laws and regulations)

Fits BLUELINE PUMP Heat Shield Shotgun 12 Gauge Tactical USA Made! BLUE LINE

$22.63
Add to cart
For sale is one heat shield to fit BLUELINE (Palmetto's Newest 870 CLone)  12 guage smooth barrels. -FINALLY BACK IN STOCK AFTER 4 MONTHS! TOP SELLING PRODUCT. -Made of virtually indestructable Plasticote Zytel Fiberglass -Will not scratch barrel like metal heat shields will. -Fits ALL Smooth barrel lengths, including 18 inch barrels -Will not add noticeable weight to your gun. -Will not rust. -Will not melt. -When it comes to heat shields, plastic fiberglass is BETTER! -Plasticote Fiberglass conducts heat 10X less than metal heat shields. -Simple 2-minute installation with included hardware (see photo for positioning behind retainer). -Perfect for active handling and tactical/military applications. -Will not fit short "Breacher" model shotguns or 590A1 Heavy Barrel model . -Also fits a Maverick 88 great! -This model has a rear retaining ring for the shield to specifically fit Mossberg shotguns.  Do NOT buy from other sellers that sell the shield WITHOUT the back retaining ring! These other shields are made for Remington! -Happy bidding and Email for any questions. I take pride in my ultra-fast shipping and positive feedback. Product usually leaves our office within hours of payment received. -As always, the lowest price on ebay. Feel confident purchasing from an experienced ebaY Pro! -Chris   (Picture is for display and installation purposes ONLY. Product abides by all ebay laws and regulations)

Fits BLUELINE PUMP Hogue Shotgun Stock + Milled Tactical Picatinny Forend

$90.51
Add to cart
Hogue 'Tamer' Stock + Heavyweight Milled Picatinny Forend Collaboration for Blueline Pump870 Shotguns   Hogue OverMolded Shotgun pistol grips feature our new Tamer™ grip technology. Hogue manufactures the grip used on the Blueline Pump870 which incorporates a special Tamer insert under the web of the hand. For those who have shot the Mossberg 500 you know this forend works! The exclusive Hogue Tamer Forend features Hogues' famous orthopedic hand shape with compound palm swells and proportioned finger grooves and utilizes an internal Tamer recoil cushion that dampens the painful recoil of magnum loads. -New with no packaging. -13.5" LOP -OverMolded with soft pebble rubber. -Used most commonly in Military/Law Enforcement/Tactical applications. -Fits 12 gauge models only. -Will not fit 20 gauge models.

About the Milled Aluminum Blueline Pump870 Picatinny Heavyweight Forend

-3 Milled (Top and Side) aluminum side-rails. -Black Milled aluminum shotgun forend to fit all 870 Platform 12-Gauge Shotguns. -Replaces factory forend with a more robust construction. . -Excellent for Wet-handed/Dirty conditions. -Mount a vertical-grip or tactical light in seconds. -The forend is constructed of virtually indestructible and fully waterproof / heatproof Milled Aluminum. -Choate style 7 1/2″ in overall length (To fit 6 1/4″ Tube length) -You can bang on this thing with a sledgehammer and it will not break.

Fits BLUELINE Pump VAPOR EYE Heat Shield Tactical Shotgun 12 Gau Barrel Shotgun

$25.86
Add to cart
Vapor-Eye Heat Shield to fit the BLUELINE Pump and Remington 870 12 Guage Smooth Barrels "Originally designed for the Mossberg 500 and Remington 870; we have found that these Heat Shields fit the BLUELINE Pumps GREAT (may take slight mods or sanding).  Shields are 13.75 in length."   -FINALLY BACK IN STOCK AFTER 4 MONTHS! TOP SELLING PRODUCT. -Made of virtually indestructible Plasticote Zytel Fiberglass -Will not scratch barrel like metal heat shields will -Overall Length is 13.80" Inches. -Be sure front bracket is fully (Finger Strength) tightened down to ensure flush fit. -Fits ALL Smooth barrel lengths, including 18 inch barrels -Will not add noticeable weight to your gun. -Will not rust. -Will not melt. -When it comes to heat shields, plastic fiberglass is BETTER! -Plasticote Fiberglass conducts heat 10X less than metal heat shields. -Because of the design of the Remington 870 NO removal of barrel is necessary for install (which is awesome). -Simple 2-minute installation with included hardware (see photo for positioning behind retainer lug). -Perfect for active handling and tactical/military applications. -Will not fit short "Breacher" model shotguns or 590A1 Or 590 Heavy Barrel model . -Also fits a Maverick 88 and Mossberg 500 great! -We warranty these shields for life: (break it, scratch it, lose a screw, WE REPLACE IT.  FOREVER)

Fits Citadel PAX Heat Shield Tactical Shotgun12 GA Life Warranty 612 Karatay

$25.86
Add to cart
Heat shield to fit CITADEL PAX smooth-barrel Shotguns "Originally designed for the Mossberg 500 and Remington 870; we have found that these Heat Shields fit the Citadel Pax Pumps GREAT (may take slight mods or sanding).  Shields are 13.75 in length." -FINALLY BACK IN STOCK AFTER 4 MONTHS! TOP SELLING PRODUCT. -Made of virtually indestructable Plasticote Zytel Fiberglass -Will not scratch barrel like metal heat shields will. -Fits ALL Smooth barrel lengths, including 18 inch barrels -Will not add noticeable weight to your gun. -Will not rust. -Will not melt. -When it comes to heat shields, plastic fiberglass is BETTER! -Plasticote Fiberglass conducts heat 10X less than metal heat shields. -Simple 2-minute installation with included hardware (see photo for positioning behind retainer). -Perfect for active handling and tactical/military applications. -Will not fit short "Breacher" model shotguns or 590A1 Heavy Barrel model . -Also fits a Maverick 88 great! -This model has a rear retaining ring for the shield to specifically fit Mossberg shotguns.  Do NOT buy from other sellers that sell the shield WITHOUT the back retaining ring! These other shields are made for Remington! -Happy bidding and Email for any questions. I take pride in my ultra-fast shipping and positive feedback. Product usually leaves our office within hours of payment received. -As always, the lowest price on ebay. Feel confident purchasing from an experienced ebaY Pro! -Chris

Fits Dickinson XX3T VAPOR EYE Heat Shield Tactical Shotgun 12 Barrel Shotgun

$30.17
Add to cart
Vapor-Eye Heat Shield to fit the BLUELINE Pump and Remington 870 12 Guage Smooth Barrels "Originally designed for the Mossberg 500 and Remington 870; we have found that these Heat Shields fit the BLUELINE Pumps GREAT (may take slight mods or sanding). Shields are 13.75 in length." -FINALLY BACK IN STOCK AFTER 4 MONTHS! TOP SELLING PRODUCT. -Made of virtually indestructible Plasticote Zytel Fiberglass -Will not scratch barrel like metal heat shields will -Overall Length is 13.80" Inches. -Be sure front bracket is fully (Finger Strength) tightened down to ensure flush fit. -Fits ALL Smooth barrel lengths, including 18 inch barrels -Will not add noticeable weight to your gun. -Will not rust. -Will not melt. -When it comes to heat shields, plastic fiberglass is BETTER! -Plasticote Fiberglass conducts heat 10X less than metal heat shields. -Because of the design of the Remington 870 NO removal of barrel is necessary for install (which is awesome). -Simple 2-minute installation with included hardware (see photo for positioning behind retainer lug). -Perfect for active handling and tactical/military applications. -Will not fit short "Breacher" model shotguns or 590A1 Or 590 Heavy Barrel model . -Also fits a Maverick 88 and Mossberg 500 great! -We warranty these shields for life: (break it, scratch it, lose a screw, WE REPLACE IT. FOREVER) Listing and template services provided by inkFrog inkFrog